Hi Owyn! It’s me again! :-))
Can you add new “STEALTH” feature?
For example: uTorrent connect to tracker and grab peers and seeders, then uTorrent send fake stop request to tracker and user will be no visible at tracker.Then when time to update tracker again uTorrent connect to tracker,grab users and send fake stop request to tracker and continue download! :-))
Can you add this?
And can you also add new feature:ignore tracker update time interval?Can you set feature update tracker manual anytime?
I tried to use userenity on http://www.torrentday.com but their system somehow detected me and banned my IP. I used only multiply my upload x8. No other functions were checked…
How do you think, how they could detected me?
delete %appdata%\uTorrent\serenity_settings.cfg file and make another one without any cheats with manager = only dht – patch, if you’r not able to – there are many other patch makers
uSerenity is faster than usual uTorrent and obviously than any modded one cuz of their packing. make sure it’s a problem of uSerenity and not of uTorrent itself.
to speed utorrent up try to clear torrent list, delete already completed ones and it should run fine. to view more products of uT all there click under “Friends” section at the right of this site
Up until now I just used v2.0.2 build 20165 (uTorrent Serenity x8). so using the latest version is a bit confusing -to me- so just wondering when the new setting will work.
what I mean, let’s say I have created two profile Uploadx8 and seed, saved them and close the settings manager. after I start uSerenity I set one of the torrents to Uploadx8 after some time -about 3hour- I set it to seed. so does changing the label of the torrent take immediate effect or stop then start the torrent or must restart the uSerenity program.
other thing torrents that doesn’t have a label did they use the Default profile or what -if yes does changing the default profile would affect them in anyway-
My Profiles [only checked settings were mentioned]
====================================
Upload Fake
—————-
Be Seeder (100% done)
No report Corrupt (0)
Fake Upload
Between 100 and 30 KB/s
if there is at least 4 peers connected
Upload x8Tox10
——————–
No report Corrupt (0)
Upload Multiplier
Between 10 and 8 X
Hold Ratio
————-
Be Leecher (0% done)
No report download (0)
No report upload (0)
No report Corrupt (0)
Don’t announce Complete event
Seed
——-
Be seeder (100% done)
No report download (0)
No report upload (0)
No report Corrupt (0)
those were my profiles so what can you tell about them (did I by any chance got them wrong); also about Seed profile can I uncheck “No report upload (0)” setting.
well thanks again for your help and for the great app.
I’m definitely still getting up to speed with how this program works….actually, it’s not so much that, it’s more getting an understanding of how you can use this program to benefit your torrent downloading activities. Anyway, this is probably been covered already, but I want to ask anyway: Does this mod do much of anything if all you’re doing is downloading torrents from “public” torrent sites?
In other words, will it be of any benefit if there’s no ratio, etc., from a private tracker that you have to try and trick? I find the most of the time I simply grab torrents that are available on public sites – ones where they don’t even keep track of your ratio, downloads, and other activity. Does using this program add any benefit considering this fact?
Hey, just want to ask you something.
I’m wondering about the peers tab/section.
What is the percentage appears to other user. Is it still 0%
or the real downloaded percentage since in the external setting (0% leechers). I use the default setting though.
to pears it shows real percentage else it would be troublesome for them to download from you and it doesn’t affect safeness almost at all, if you download something from a peer but still have 0% that’d be totally not safe, but if i discover a way to make it 0% i’ll add this option
Oh I see. Thanks for the info. and thanks again for modding utorrent to be a godlike software like this. I usually get 30-40 kb/s with utorrent now it become 100-400 kb/s with this mod.
You must be a good reverser. Keep up the good work!
Hi, greatest tool Owyn… you say there is no snatch list entry but on Torrentleech i have snatch list entries with 0b down/up what am i doing wrong thank you
snatch list is the list where all people who has 100% downloaded torrent are listed. if you ticked “no complete” then you misstake peerlist with snatchlist.
Owyn you are the man ! Userenity is the great ! I have a question using it at waffles. I just want to fake my upload so I only ticked fake upload. I have problem with download count for example at snachlist file originally have 361 mb when i downloaded it using serenity it count as 713.11 mb. Am I doing something wrong ?
Does this mod have the “No anti-leech protection (no ratio)” feature like other mods do?
Thanx for the answer.
Hi Owyn! It’s me again! :-))
Can you add new “STEALTH” feature?
For example: uTorrent connect to tracker and grab peers and seeders, then uTorrent send fake stop request to tracker and user will be no visible at tracker.Then when time to update tracker again uTorrent connect to tracker,grab users and send fake stop request to tracker and continue download! :-))
Can you add this?
And can you also add new feature:ignore tracker update time interval?Can you set feature update tracker manual anytime?
Thanks for more an mod!!!
Hi,
I tried to use userenity on http://www.torrentday.com but their system somehow detected me and banned my IP. I used only multiply my upload x8. No other functions were checked…
How do you think, how they could detected me?
And what is the best options to choose?
Thanks,
probably either your provider don’t give such high speeds or you were on a torrent with 1 peer, you uploaded 800MB, he downloaded 100MB, this was seen
how could they see what’s my provider speed?
Please, make uTorrent 3.0 Serenity mod !
Hello,
Can you please make a utorrent with DHT patch ONLY.
I dont need Fake Upload or Multi Upload or anything like that.
and recently i’ve lost my Profile in Serenity Utorrent. it is not showing Labels anymore.
i can not create new label in Serenity utorrent profile manager.
Please help. I’ve also noticed this mod takes lots of system resource. slows down my computer. and hangs once in a while.
delete %appdata%\uTorrent\serenity_settings.cfg file and make another one without any cheats with manager = only dht – patch, if you’r not able to – there are many other patch makers
please make a simple tutorial
Thank you so much for the solution Owyn. i owe you a beer.
Owyn i have one more question. Can you name some DHT patch makers for the latest version of utorrent ?
or if possible give me a link here. and thanks for the solution. everything is working. i dont use fake upload or multi upload at all.
All i need is DHT cause i’m an active uploader at multiple torrent sites.
Thank You
Note: I’m still facing one problem. userenity freezes a bit when loading from system tray.
uSerenity is faster than usual uTorrent and obviously than any modded one cuz of their packing. make sure it’s a problem of uSerenity and not of uTorrent itself.
to speed utorrent up try to clear torrent list, delete already completed ones and it should run fine. to view more products of uT all there click under “Friends” section at the right of this site
Owyn
thank you again for the feedback.
After clearning my huge download list everything is way way way better now :P
i have a question regarding Seed profile.
i have taken screenshots.
Here is my Default for DHT
my leecher mode. i hope i checked everything right.
and here is my Seed profile(label). i have a confusion about it. Should i also check “Don’t announce completed event” ?
please let me know if there is anything wrong.
THANK YOU AGAIN ! :P
if you announce completed they’ll know you have just downloaded it to 100% and it wasn’t 100%, so you need it. all’s ok i suppose
Does anyone know if uSerenity will work properly in Linux with Wine?
Up until now I just used v2.0.2 build 20165 (uTorrent Serenity x8). so using the latest version is a bit confusing -to me- so just wondering when the new setting will work.
what I mean, let’s say I have created two profile Uploadx8 and seed, saved them and close the settings manager. after I start uSerenity I set one of the torrents to Uploadx8 after some time -about 3hour- I set it to seed. so does changing the label of the torrent take immediate effect or stop then start the torrent or must restart the uSerenity program.
other thing torrents that doesn’t have a label did they use the Default profile or what -if yes does changing the default profile would affect them in anyway-
My Profiles [only checked settings were mentioned]
====================================
Upload Fake
—————-
Be Seeder (100% done)
No report Corrupt (0)
Fake Upload
Between 100 and 30 KB/s
if there is at least 4 peers connected
Upload x8Tox10
——————–
No report Corrupt (0)
Upload Multiplier
Between 10 and 8 X
Hold Ratio
————-
Be Leecher (0% done)
No report download (0)
No report upload (0)
No report Corrupt (0)
Don’t announce Complete event
Seed
——-
Be seeder (100% done)
No report download (0)
No report upload (0)
No report Corrupt (0)
those were my profiles so what can you tell about them (did I by any chance got them wrong); also about Seed profile can I uncheck “No report upload (0)” setting.
well thanks again for your help and for the great app.
>> stop then start the torrent
>> you can uncheck that
I’m definitely still getting up to speed with how this program works….actually, it’s not so much that, it’s more getting an understanding of how you can use this program to benefit your torrent downloading activities. Anyway, this is probably been covered already, but I want to ask anyway: Does this mod do much of anything if all you’re doing is downloading torrents from “public” torrent sites?
In other words, will it be of any benefit if there’s no ratio, etc., from a private tracker that you have to try and trick? I find the most of the time I simply grab torrents that are available on public sites – ones where they don’t even keep track of your ratio, downloads, and other activity. Does using this program add any benefit considering this fact?
Thanks for answering a stupid question.
well, probably no :)
please, I need clarification dilemma …
I need to rig the upload: download ratio to 1:1 …
little help please?
uTorrent 2.0.4 Build 22967 has been released.
Hey, just want to ask you something.
I’m wondering about the peers tab/section.
What is the percentage appears to other user. Is it still 0%
or the real downloaded percentage since in the external setting (0% leechers). I use the default setting though.
to pears it shows real percentage else it would be troublesome for them to download from you and it doesn’t affect safeness almost at all, if you download something from a peer but still have 0% that’d be totally not safe, but if i discover a way to make it 0% i’ll add this option
Oh I see. Thanks for the info. and thanks again for modding utorrent to be a godlike software like this. I usually get 30-40 kb/s with utorrent now it become 100-400 kb/s with this mod.
You must be a good reverser. Keep up the good work!
In addition to µTorrent 2.0.4 Build 22967, µTorrent 2.2 Build 23056 is now released. Please update.
µTorrent 2.2 build 23071 please! :3
2.2 Please :)
2.2 Please :)
Hi, greatest tool Owyn… you say there is no snatch list entry but on Torrentleech i have snatch list entries with 0b down/up what am i doing wrong thank you
snatch list is the list where all people who has 100% downloaded torrent are listed. if you ticked “no complete” then you misstake peerlist with snatchlist.
Owyn you are the man ! Userenity is the great ! I have a question using it at waffles. I just want to fake my upload so I only ticked fake upload. I have problem with download count for example at snachlist file originally have 361 mb when i downloaded it using serenity it count as 713.11 mb. Am I doing something wrong ?
when i open uSerenity Settings the erreur problem apears so whats the solution
Appreciate the recommendation. Let me try it out.
is there a way to disable the 0.2 kbyte upload? i always have it.