Click SAVE settings on first manager run,else default profile would do NOTHING
DHT-Patch:
Ignores the private flag, so DHT and Peer Exchange is enabled for ANY new torrent. – so you can get more peers and sends on your torrents
–Be Seeder:
Your “left to download” stat is always reported to tracker as 0%. *So that says you already have everything.
–Be leecher:
Your “left to download” stat is always reported to tracker as 100%. *So that says you didn’t download anything.
–No report Download:
Your download isn’t reported to the tracker. (always reported as zero) *So you don’t have to worry about your ratings and faking stats.
–No report Upload:
Your upload isn’t reported to the tracker. (always reported as zero) *So you don’t have to worry about your ratings and faking stats.
–No report Corrupt:
Your “downloaded corrupt file-parts” stat isn’t reported to tracker (always zero). *If you didn’t download anything, how come you downloaded something corrupt?!
–Don’t announce Completed event:
The completed event isn’t sent to the tracker. (No entry in the snatchlist or smth like that) *And yes it is really not reported, not like in other mods, here it just doesn’t send anything to tracker when you complete a torrent.
–Connect tracker just Once on start to grab peers:
You connect to tracker just once on .torrent start to grab peers, on timeout you will be removed from peerlist in torrent profile on tracker’s website
–Upload Multiplier:
Multiplies your uploaded stats being sent to tracker by a random number in the range you choose
–FakeUpload:
Every second after .torrent start random number in the range you choose is added to uploaded stat which will be sent to tracker depend less upload you or not, you can specify minimal amount of peers to be connected to in order to add fake upload (connected means currently uploading to)
–Per Torrent settings:
You can choose settings for each .torrent you has (noupload, nocomplete, fakeupload etc) using labels
Instruction:
-Unzip contents to your Utorrent folder (or anywhere else)
-Make a shortcut of uSerenity to your desktop (or don’t)
-Add setting-profiles in uSerenity -settings manager-
-Use them as labels in uSerenity
-Check about page in uTorrent Serenity to see if it is loaded ^_^
Labels:
-Case insensitive
-Works if found inside label string (eg. profile “stealth” in label “(Stealthy) Porn”
-No label = default setting profile will be used
-Label matching no setting profile = default settings profile will be used
Other:
-announces are fully correct and don’t differ from normal uTorrent announces to tracker (rare thing nowadays)
-Should be faster than original Utorrent (nocompression)
-Nice bright icons and changed about window
-Noinstall – it just launches
-If you use portable mode so uSerenity will use it for its settings
-not removed updating *if you want to see when new version comes out, and if it does, come here and get a new one :> *it can be ready in less than a day if I know about new version
– settings manager makes settings file and uSerenity loads it on startup
-if you’r getting “Application failed to initialize (0xc0150002). To exit, press the “OK”” then install this Microsoft package
Heyy
I love your apps and tweaks,
but how do i use the uSerenity settings?
is it possible if you could write a guide or should i leave it on default
Also whats the purpose of the “no report upload” then wouldn’t it mean your upload to the tracker never increases?
Thank you! =)
>>wouldn’t it mean
yes, never, that’s called stealth
>>how do i use the uSerenity settings?
i wrote an instruction in my post and an image, to see what labels is and how to use it there is an official uTorrent FAQ at http://www.utorrent.com/faq#faq9
[…] Feautures […]
So how do you reduce upload? I’m downloading 10kb and uploading 200kb.
real upload? that’s good, else put lower values
Hi Owyn I am running an AMD Athlon XP 2600, With Win XP SP3, this version now load ok.
But when I try to run fake upload it crashes.
If the crash log is of intrest I would be more than happy to e-mail it.
it gives uT has crashed, send dump to developers? if yes they upload a dump somewhere and give me the link (.dmp file in %APPDATA%\utorrent )
Owyn
Here is a link to the crash dump file, random crashes when trying to fake upload, and no upload data geting to tracker.
http://www.***
downloaded it, but it doesn’t open, weill i presume your processor is too old and don’t know some instructions like cvtss2sd to make float value into integer, you can try to upload some more dumps or find out yourself it is so
What a crappy manual. Just say me, whether settings manager must run to fake?
>>-Use them as labels in uSerenity
What’s supposed to mean? You’ve done much work, but now you need to clarify how to use this stuff. WHAT IS LABELS??
I see only a listbox in settings manager with profiles. And where is this faker’s profiles supposed to keep on disk?? And how to reset it to defaults?
See, dude, I am software developer too and I don’t understand.
see http://www.utorrent.com/faq#faq9
I do not succeed to install the new version the 2..0.3 says to me that not e’ correctly error(0xc0150002), it could depend made that I have Xp with sp2 and I must mount the sp3 or not
try this http://www.microsoft.com/downloads/details.aspx?familyid=a5c84275-3b97-4ab7-a40d-3802b2af5fc2&displaylang=en
thnx… keep up the good work..
Used your mod for a long time now, works as a charm! Just wanted to come by and say thanks for all your efforts!
Transferred last 31 days: 472GB ^_^
[…] Feautures […]
[…] Feautures […]
[…] Feautures […]
-Add setting-profiles in uSerenity -settings manager-
i dont get this. What settings, and how to add them ? Do you refer at Default, normal, etc ?
———————————-
And userenity settings should be open when im downloading ?
Or more simply, If i download a torrent file, i press add button, and save, its that all i have to do ?
userenity settings should be saved before you open uTorrent Serenity,
add = button between rename and delete
refer to instructions and explanations on the top on this page if you have any further questions
Your instructions say to view the ‘About’ page to see if the labels are working — will the about page show all the working labels you’ve made or is the about page just for the Serenity website and all that?
website and all that ^_^
kaspersky internet security 2011 says utorrent serenty trying to access password storage files
delete kaspersky and install something good
Is the DHT Patch included? If so, how? Is it by default or do we need to press a checkbox?
I found a bug. ;P
You can’t use similar labels in uSerenity settings app. :)
I made two separate labels “fake seed” and “fake seed high speed” and restarted uSerenity app. After that there was nothing much to do, because neither the serenity app or the settings app would start. Reinstalling (copying over uSerenity, settings app and .dll) didn’t help at all. I had to find the settings .txt file and rename it, to start the apps. After that, I’ve changed the names of the profiles and it works fine. :)
Remember – no similar labels. :)
[…] Feautures […]
torrents still say DHT not allowed
Hey there.
Could you add some configurations of yours into the release?
For Example i dont know how to setup the “Only connect one time” thing. Dor me they are shown as leecher (i picked everything but “100%” and the FakeUpload things…
Also my UploadMultiplier is shown as a leecher, and i only picked the Uploadmultiplier :(
Br
SH
Hello all.
Does this mod have the “No anti-leech protection (no ratio)” feature like other mods do?
Thanx for the answer.
My Question from before is already answerd.
I think i got the right configs now. But it would be great if you add some examples to the download.
And some new:
1. If i got 2 configs (FakeUp and FakeUpXP) and put a torrent into the label “FakeUpXP”, which of the settings are used?
2. If i change a label of a running torrent, is the labelsettings taken by change or do i need to restart utorrent/torrent download?
1. the on which is more high in settings manager
2. stop and run torrent again to use new label
I have the following problem:
When i set FakeUpload it always “uploads” the amount for every active seeding torrent, not total, even if i set the Multiply to 1, it does it per torrent so it will be too much in total.
Is there a way to make a total fake upload limitation?
hi i have downloaded this and am running it please can someone tell me how to tell if it is working,
if i understand this correct then i need to make a profile (made one called faker) then i need to right click on the torrent and add label right? add the label faker and then what is it working or not?
[…] Feautures […]
Does this mod have the “No anti-leech protection (no ratio)” feature like other mods do?
Thanx for the answer.
it has what it has, np.
I only want to know if it does. Didn’t want to compare with others.
So, it does have it?
see here for list of what it has https://utorrentleechermodserenity.wordpress.com/about/
Hey,
if i finish a download with a setting including only fakeupload (also if no leecher present) the tracker will get a invalid ID and the complete flag upload/download will not be sent.
you know how to fix this?
Or maybe you can fix this in a later version?
only fakeupload does only fakeupload, nothing else
Hey, can you change the range of FakeUpload caus’ i have a Fiber connection and i’m normally seeding at 5/10 Mb/s so adding some Kbs is not really useful :D
And i don’t know why but i don’t see any change in my ratio :o ?
Thank you for this useful soft :)
if you upload at 10Mb/s you don’t need FakeUpload at all :)
Just obsessing the details –
Regarding labels and profiles:
> -No label = default settings profile will be used
What if the torrent has a label, but no uSerenity profile string matches any portion of it? Does it use the uSerenity “Default” profile (with DHT “forcing”, etc.), or does it use the uTorrent default (without uSerenity changes)? For example, if I create uSerenity profiles “alpha”, “beta”, and “gamma”, and attach labels to torrents named “this”, “that”, and “other” (not blank), what settings will they use?
Do the upload “fakes” only go out to the tracker(s), or do they mix in with my local upload statistics (as reported in the “Show Statistics” window)?
And, two suggestions –
A useful one:
Pattern “globbing” in the uSerenity profile names would be nice. Full blown, regular expressions seem like too much work (for the users, at least). But, “*” and “?” (just like file name matching) seems to be simple enough to grasp. I know it would break current profiles. But “updating” them would only require appending a “*” to each end of the name, to restore “old” functionality. After that, the user gets more delicate control over everything.
A trivial one (well, trivial to use – probably a “bit” of work to implement):
How about letting the user include a color vector in the configuration file for the icon? Just a “base” triplet. All the “standard” pixels get “grey scaled” off of it (so there’s no need to decode an actual image file – and no “very bad things” to happen with “random” images). I actually like the cerulean logo better. But it “washes out” when the window loses focus. Instead of tweaking it for one color scheme, just let the user “do it themselves”.
Label matching no setting profile = default settings profile will be used
fake upload stat goes to your client data as well and you can see it in uploaded column
>> * and ?
having fun aren’t you? if you want to place ? or * at the end or start you could just write profile name after or before it or, yes, use simplier names >_>
>> letting the user include a color vector in the configuration file for the icon?
1st. not possible change icon on the fly
2nd. do no want
3rd. you can change icon with uTorrent costumization (see their website) or with programs n tools found in internet
I didn’t mean including the characters ‘*’ and/or ‘?’ (simple string matching would probably work fine for the characters, themselves). I meant using them as “pattern globbing” “metacharacters” – so I could (for example) include a profile named “Linux*” that would apply those settings to torrents labeled “Linux x86” and “linux-ubuntu”, but not to torrents labeled “windows not linux” nor “sneaky linux”, since the “globbing” pattern would match labels starting with “linux” followed by any number of characters, but not labels starting with anything else, that just contain “linux” (the way file name “expansion” works on most shells).
That’s why I mentioned appending *’s – if you added pattern “globbing” then a current pattern would have to have its name changed to “*pattern*” to work the same way it does now (matching “pattern” anywhere in a torrent label).
But, you’d also have the ability to only match labels with the text in certain places (for example “porno*pyros” that would match “PornoForPyros” and “porno for pyros” and “pornopyros”, but not “porno” or “sounds like Porno for Pyros”).
[…] Feautures […]
[…] and so on…… More« LimeWire Pirate Edition DownloaduTorrent Serenity 2.2.0 Build 23071see Feautures page/Homepagechangelog:- added No-Upload (byte change base from The248) (No Ratings Yet) Loading … Share […]
Great mod. Thanks.
hey will u be able to have an option where the amount we download is shown as the uploaded amount…..btw this is a great software
Thanks
Hello,
I’ve made a fake upload profile called Fake. So I assigned to all my download a new label called Fake.
Looks like the tracker recognize Im uploading but Im not sure if the speed is working. How do I know how much I’ve uploaded and how much Im uploading?
If you have a forced upload, you can limit the true upload onto a minimal level (for ex. 6kb/s)
Now you look onto the “Uploaded”field of the torrent.
There is the fakeupload (and the real) counted.
Also: The average uploadspeed. There should be, if you set it from the beginning, a higher value as your real uploadspeed.
But before that all:
Create the setting fpr the mod, and then restart userenity.
Hello,
I dont understand something.
I’ve made a stealth profile. I run uSerenity than assign a new label to all my downloads with the name Stealth.
Now how do i know if everytime is working fine?
It is nessesary to know what settings you have choosen.
I need an explanation step by step please. Im pretty dumb.
For example I dont want to show to the tracker Im downloading a file. So I set up a profile calling it Stealth.
I just click on:
No Report Download
No Report Upload
No Report Corrupt
Dont Announce Completed Event
and I leave everything else unclicked. Is that right?
Than I save the profile, I download the torrent from the tracker and I load it with uSerenity.
I select the torrent and assign a new label calling it Stealth.
Is that right?
Doesnt the tracker see Im connected?
If I load the torrent with uSerenity but I dont assign a laber in time? What will it happen? Like the download start without label and than I assign the label.
right,
it does,
it will use default profile
Owyn,
So is it normal that the tracker shows Im leeching even with a stealth profile?
It doesnt report any download data it just shows that Im leeching. Is it ok?
normal. ok.
How can I Do
Download = Upload
It is possible ???
[…] Feautures […]
ur genius man i hav been using it for a while n i never got ban this software u made is unbeatable
cheers for you
thnk for making it
great program, I upload at max speed (1Mbps) 24/7 and set a multiplier of 1.2-1.8x…hope that is safe on a https announce private tracker…
Thanks for sharing with us! lemme know if you need anything, i’m unemployed and have time..Thanks
Hi Owyn!
I’ve received the Copyright Infringement e-mail from my provider which in turn had received complaint from Columbia Pictures Industries. It states that I infringed on the legal rights and the provider may suspend or terminate the supply of services to me. I used uSerenity’s default settings and thought I am protected from this kind of accusations. I hope to hear the comment from you. Did the setting work? And how do I know if your mod is working fine?
Mod has nothing to do with legal rights untill you turn on NoUpload in setting manager.
Hello Owyn!
I write in Russian because I do not know much English
uSerenity может обманывать трекер с двумя или больше announce ссылками?
Пробовал обмануть rutracker.org с настройкой Connect tracker just Once on start to grab peers. Одну ссылку announce uSerenity выключает а вторую ссылку announce не выключает :(
не может такого быть. данная опция пропускает announce только с пометкой started (т.е. при старте скачивания торрента), все остальные выключает.
2.2.0 Build 23703
Hy Owyn
The upload reported becomes NEGATIVE if more than 10 digits. Ex:
18:36:55 USERENITY.EXE tracker.xxxxx/announce.php?info_hash=xxxx&peer_id=xxxx&port=xxxx&uploaded=-8589934592&downloaded=247463936&left=31313543168&corrupt=0&key=xxxx&numwant=xxxx&compact=1&no_peer_id=1
Tracker reported : Failure: unsupported tracker protocol, please upgrade your client (uploaded is negative)
Maybe a integer overflow somewhere… A 64b var could maybe help…
Thx in advance
Dont you think that if you are uploading with 1000000000 Bit(?) is some kind of suspicious?
Think about it.
But maybe i dont understand your concerns.
uploaded stat range is from
–9,223,372,036,854,775,808
to
9,223,372,036,854,775,807
and that should be enough
use debug version http://www.mediafire.com/?77u4ftub18jyzar and upload log.txt from uSerenity dir after problem so i can see which conversations creates this error, don’t forget to blank your keys and ids if you want.
@Owyn
Any idea how to make serenity the default torrent client?
go to options and click “acossiate torrent files with utorrent”
Hi Owyn,
Thank you for the answer. I tested the debug dll for a while and i have a beautiful log with 3 negative uploads… Search for “upload=-”
Do you have an email where i can send you this file ?
Just an other little pb, Serenity is not closing properly… The task remain alive even after closing the application.
By the way… have a nice 2011 year and thx again for your work.
make sure you are using latest version of uSerenity and upload to mediafire and post here.
serenity does nothing about closing, see if this happens with original uTorrent, can’t do really anything with closing not knowing how and why it happens.
You can download the log file from the adress below:
h**p://www.mediafire.com/file/0i0x2h46015skd6/serenity_log.txt
For some private trackers the important thing is to maintain a particular ratio between upload and download. I think that your dll “intercept” the original string sended to the tracker and then modify it. It could be helpful to have a feature like upload=var*download.
var could be setup in your handy prog.
here try this
http://www.mediafire.com/file/4xrqzvppktr7tsz/2.2.0_23703_Fix.zip
and say if it helps, found possible problem place and fixed.
Hello Owyn
Good work, thank you very much for your fast fix.
I’ve tested it 4 days and no more negative uploads.
Concerning the little closing pb, there is an advance param called bt.graceful_shutdown that maybe could correct it when set to false….
lol i cant understand how to use this.. Crappy instruction..
you use make a youtube video on how to use this or better explanation..
The instructions are perfectly clear. The problem lies between your chair and keyboard.
Is it possible to add the feature of emulating other utorrent versions?
Would be awesome :)
[…] Feautures […]
Can I run default settings with fake upload activated?
Is that would be okay?
Don’t I get caught or something?
default is stealth, fake upload is not. try to understand what each checkbox does and select what you want.
I’m trying to really but I just can’t figure it out! :D
When I’m downloading a torrent I just want to be detected as uploading to increase my ratio and in the same time not to be detected as downloading :)
Please a hint would be appreciated. :)
[…] Feautures […]
[…] Feautures […]
Could you add a feature that can send fake download state?
that’s pretty senseless for stealth downloading\uploading idea about this mod ^_^ and you already can do that with proxyes and others tools like Charles
excuse me, where can i find the stats of fake upload?
i cannot see any different when i use this leacher mod…
I can’t seem to run serenity with the official utorrent client. every time I go to launch the official utorrent the exe is replaced with userentiy, even in different folders.
Any ideas?
you need to close previous open program, so if you want to run uTorrent you need to close uSerenity first and vica versa.
Hi,
Thanks for this great programme.
I was using it for a while and it has been plain sailing.
However, yesterday for whatever reason, when I opened uSerenity it took me through the uTorrent installation wizard. Trying to go around it several times didn’t work so I gave in and went through with the wizard.
Ever since then, my download and upload haven’t been affected by userenity at all. Only the true values are going through. I have ensured I am indeed running userenity.exe and that I have set up profiles and labels correctly.
I have tried uninstalling uTorrent and reinstalling it to no avail.
When I am in userenity.exe I clicked on Help > About uTorrent
And it shows the about screen as it does on stock uTorrent.
Please advise.
Thanks in advance.
try uninstall fully and extract uSerenity to separate empty folder.
Hi thanks for your reply.
I did that and it is now functioning as normal.
Thanks a lot!
Got to say thanks so much for an awesome program/mod!
Makes it so much easier to upload to these private tracker who enforce at least a 1:1 ratio policy.
I have just be using the feature of multiplying the upload and using 8 and 8 and saves a heck of a lot of my time being able to upload GBs of data easily.
Helped me turn my ratio around like crazy for eg from 0.05 to 2.80 now.
A lot of these private trackers are too well seeded and make it hard for people with low upload speeds to get to 1:1.
What could take me days and days now takes me only hours.
I find if I manually update the tracker every so often it helps instead of wating the whole 30mins auto update time.
I probably could lower the multiplier setting so it doesnt try and upload too much data too quickly and can use the whole 30mins update time.
I shouldnt have to use the multiplier for a long while now though!
hello
i have a question
when i use it,labels only exist no label.why?
hi, I’ve been trying to get this to work for the last couple of days but it’s just not happening. I want to fake upload on a torrent and have the tracker register the actual downloaded amount and fake uploaded amount. I created a profile “one” and labeled the torrent “one”. In the settings I ticked off
“no report corrupt” and “fakeupload” from 130.5 kb/s to 235 kb/s. I downloaded the torrent, but the tracker only reported my ACTUAL uploaded data. Is there something wrong with my settings? And also, should I be able to see the fake upload speed in the upload column? In my client while I was leeching the torrent, it only showed my actual upload speed (which was 20 kb/s at the time).
Thank you.
make sure you created and saved profile “one” in settings manager before starting uSerenity.exe program. and speed is showed only in average and how much you uploaded in “uploaded” column.
Excellent job done Owyn. Its working like charm.
To all those who are unable to understand the usage instructions, use your head and you will understand its usage. Its not that difficult.
One thing Owyn:
When you go to “Help:Show Statistics” it gives you actual upload data and not the fake one.
I need it to be fixed. Or at least tell me where is this data stored in computer and I will change it manually when needed. Actually some sites asks to take a screen snapshot of the Statistics. You know what I mean. Can you please fix this.
Thank you
Btw dont try and use this on revolutiontt.net. They have a system that detects utorrent uSerenity and you will get banned. That site was always a right pain to upload to anyhow lol.
But has been working a treat on another site I download my things from! Just detects it as utorrent 2.2.1
There is a problem though when you use uSerenity it tries to take over all your .torrent files overiding normal utorrent as the default opener and the utorrent install file. The only fix that works for me is to go through the utorrent installer again to overide uSerenity.
I have to go through the utorrent installer everytime if I want to open normal uTorrent after I have used uSerenity.
Dont know if this is the same for XP but certainly does it on Windows 7 64-bit.
are plan to build utorrent 3.0 x64 edtion of serenity torrent?
[…] Feautures […]
Cool tool… easy to understand the concept of use compared to running various versions of “tweaked” uT’s.
it annoyed me at first about uS taking over every uT installed. THEN i remembered LABELS! Just created a label that has all of uS features turned off for trackers I use legitimately and i was good to go running untracked and tracked torrents. ;)
Thanks for the effort. You rock.
I have saved my settings settings manager but it did not creat a .cfg file. I have tried creating different profiles…nothing works!!
Also, how can I tell if my profile is loaded by selecting “about utorrent” in userenity. It always shows the same message regardless of the profile I chose.
Thanks.
debug would help you. how can you know it doesn’t save cfg file? have you clicked “save settings” after you make them?
Thanks for you response. I finally realized that it was saving the .cfg file to the
/user/… folder. I was looking for it in the root directory of the program.
Jesus Christ, the explanation of how this all works is so crap.
When people are seeking help in here, all they’re getting is not only dumb jumble mumble and absolutely useless referals to some info on other websites but also getting blamed for not understanding.
Honestly, how arrogant can you be? If you had written only once a proper step-by-step instruction, you could have saved many people’s time. But no, you can’t be bothered. It’s so much easier to blame others about how dumb they are, and I bet it makes you feel so incredible smart and important, right?
Sorry, but I just don’t like time wasters like you.
it’s a webblog of the tool, not a hack portal with all kind of guides and information for learning. instructions and guides should be searched elsewhere, in appropiate places (sb-innovation for example, as i remember it had few tutorials for uSerenity and a thread about how to cheat on every tracker and whichi methods to use there). Neither I can write all the guides nor provide support for such massive instruction sets.
Works really Excellent. Without lagging. DHT work so good :)). Great,great job man.Keep on working like this. For those who asking for 3.0 mod i will say that 2.2.1 is the most stable release of utorrent (original) until now. The 3.0 is buggy enough with upload speed and you don’t want a buggy mod on buggy release!
From what i had seen in the processes of windows this mod is better then the original 2.2.1, no more killing the process to stop the program after exit.
Owyn can you fix in the next release of uSerrenity the problem with the Disk cache,especially the field when you can override automatic cache disk size manually in the advanced options of uSerrenity.In the uTorrent you can enter whatever size you want! In uSerrenity It says “Please enter a valid disk cache size between 0-1800”!
The problem is that i want to enter more than 1800(MB) and then this error appears.The only way to do above is to switch to utorrent(original release) and then resize (for example 8192) this field above 1800->exit, then switch to uSerenitty,and if you want to change some field on the preferences menu,then the error appear!!
Thanks.
are you sure you are using same verisions of uSerenity and normal uTorrent?
I tried with 2.2.1 25130,2.2.1 25110 versions of utorrent and the same problem apperars, so the problem is in utorrent.With previous releases of utorrent(1.8.3, 2.2.0) the problem disappear both on uT and uS(2.2.0_23703).So can you make any changes in userenity 2.2.1 25130 , to solve the problem with disk cache or i will report the problem in the official utorrent forum?
As it is not the problem related to what uSerenity modding does – it’s not in my power to fix it, try official forum if they still support 2.2.1.
Thanks for the quick reply. One more question from me : Can you tell me is there a big difference except the mentioned in changelog in the userenity version 2.2.1 Build 25130 and 2.2.0 Build 24402? Would there be any problems with fake up and multi on v. 2.2.0 when you add above 2+GB per session?This is the only thing that i am curious and wondering about,because of the torrents bigger than 30GB+!
All changes are posted with releases, if you don’t upload more than 2gb per torrent with faking it won’t do a thing, but if you do then you just get static 2gb reported all the time for that torrent.
Thanks Owyn for this nice program
so this program work with all private trackers like (TorrentLeech.org) and (Demonoid.me) ???
It’s just like normal uTorrent except it has ‘feautures’ :)
Hi Owyn, like your program, but I have a run into small question the program works on one computer but it doesn’t work on my other computer,
one that it does work on runs on: XP (SP3)
one that it does not work on runs on: Vista (SP2)
I messed around with the settings, and decided to duplicate the XP version that works to the Vista version that doesn’t seem to fake it, all the settings are the same in the settings manager. both sharing different torrents, but applied the labels and everything, i am just confused now to how this is possible, hopefully you can help with this matter.
Thanks in advance!
just say _how_ it doesn’t work? does it give you an error when you try to launch it or something?
so is this better than what seba14 released in the utorrent department?
since his mods do the same as yours , btw why no latest utorrent 3 and only 2.2.1?
those simple mods are banned right away when you turn it on on normal trackers with any kind of security, and those can’t possible “do the same” as this one.
If you don’t like uSerenity – don’t use it, you’r free to use and like whatever you want depending on your capabilities and preferences.
not to forget his is preset .exe’s no need to configure, its install ,select the one you want and roll, easy as that
ok sounds fair to me, i guess ill give your version a try then , thanks for clearing that up for me , any plans for a latest utorrent build mod?
Not currently, but if a reason to do so would be ever found – I will reconsider my plans.
so what your saying is the latest utorrent isnt worth it ?
ok so after thorough testing i can say it wont work !
still reports download and upload to private tracker even thou default profile is selected , very odd hmmmm….
You didn’t save default profile, did you?
yeah , why?
i didnt click on save ….but now i just did , was that the problem?
Yes :)
i see -.-‘…xD
yeah i know i know , im a noob , sorry im not mr. perfect xD
ok now i need some prohelp from you owyn
its about creating a profile that is stealth but boosts my ratio almost instantly without being suspicious , since i gotta find a way to even out my ratio after messing up with the not saving my default profile thing ive had , yeah private trackers pay attention to
ones ratio -.-‘, id appreciate alot , then once my ratio is boosted to a nice number ill go back to your full stealth preset default profile,
please dont point me to a faq i need your help not a faq that i dont understand , thanks in advance bro
You could make a profile to say you’r a seeder and don’t report download and completed event and use fakeupload with speed you’d like to easily boost your ratio,
and there are no faqs here btw :) cuz it’s not a cheating website, it’s a website of a cheat-tool and I don’t cheat much myself usually so can’t really give advices on that, if tracker you want to cheat on is something important to you and it’s hard to get invite for it you better read faqs :P
thanks for the protip ill try that out asap , peace and keep it up owyn, great work you do !
thanx for this man! u just saved alot of waiting hoping that some time of the day some of dead torrents im downloading will exceed 10kb/s!
awesome!
please also put some protocol encrytion or any obfucation of torrent traffic, because my isp “airtel”(india), has completely blocked torrents download, while some places throttled the speed. please do some to over or bypass such activities by any isp’s. in next version. because utorrents own such protocol encrytions & traffic shaping tricks are not working.
if already have a solution to that or any source for such, please mail me @:
vijay33332000@yahoo.co.in
You should write this to uTorrent official forum.
btw, you could allways try proxy or VPN to bypass it.
Why the fuck do you do this? I never understood you leechers, you’re basically licking the corporations’ ass by contributing to the destruction of file sharing and for what? It’s not like you lose anything by seeding, hell you don’t even have to fucking do anything.
Other than lose my monthly data allowance?
I would upload if I had higher monthly allowance. Not everyone is as fortunate as you.
Problem .exe in winxp not start, wtf.
bye.
why not?
bye.
yes this error, (0xc0150002) why?? thx.
Press ctrl+f on this page and enter 0xc0150002 , solution should be shown immediately :P
I apply, thx work. wowowwwwwwwwwwwwwwwwwww
thx.
Do you have to run the utorrent program (Green Icon) first on your pc & then copy utorrent serenity mod files (Blue Icon) to that folder in program files? Also in settings manager, after saving those settings. How do you load them into the utorrent serenity mod application. Must the program be open first, then load the settings or must the settings be loaded once a torrent starts downloading?.
Yes, probably, but you can try without utorrent previously installed and it still should work. uSerenity loads those saved settings itself with no help.
I created a profile under utorrent settings manager using the same settings as the default one. I save it and load it but it’s not visible in “about” when i open utorrent serenity…
why would you think it should be visible there?
i had “set” my uSerenity Settings to “No-Upload”,
but today when i was downloading with “uTorrent_Serenity_2.2.1_25130_NEW” the torrent(hash: 191FEB6879C2B1EDF7B08B955B81829EC6D5E5E4 ), but the uSerenity is uploading to the peer “deluge 1.3.4” client, and it is uploading the client 0f 80% of my bandwidth, but it is not uploading anything to anybody before torrents i was downloaded and also now downloading torrent, except this “deluge 1.3.4” client, please tell a solution to such uploading problem to only “deluge 1.3.4” client, is that client is a moded or using some holes of uSerenity to upload. please solve this issue with of uSerenity with the “deluge 1.3.4” client. thanks owyn, waiting for the solution of such issue
can’t. i didn’t make noupload, just implemented it, ask The248 (author)
so, owyn you just implemented no-upload feature in it, but that no-upload feature works well on all peer client’s when downloading, but why it is not working against “deluge 1.3.4” client. if u know please reply, or u want to explore my problem, here is my torrent hash ( 191FEB6879C2B1EDF7B08B955B81829EC6D5E5E4 ), search & try, its a education video torrent, and the client is now downloading right now.
thank you for ur responses
Okay I just tried this mod because there was a lot of stuff I wanted to download from a private tracker. I went with seeder mode on 2 of the 3 torrents I’ve downloaded today. The first two was done stealthily without a hitch, but the third one doesn’t seem to want to start torrenting and I keep getting this error ‘Please finish your current downloads before starting another’, even though there are none downloading. I have Be Leecher on, No report up/down/corrupt on, Don’t announce completed event, Connect tracker once on, and Multiply speed by # peers on. Any way to fix this?
cuz you was a leecher and started torrents without complinting em (nocomplete) it says so i suppose.
owyn, i want to thank you and the other authors for making this program and keeping it alive, it’s given me very quick download speeds as my upload speed blows.
Thanks again.
Works flawlessly for over a year.
You did me and all these people a great favor.
I think thank you isn`t enough,but thanx anyway man,keep up the great work & all the best to you
Hi, running into huge size 1TB+ torrents that for some reason don’t work in the current version but do in the 3.2 beta build of utorrent. will you beable to fix this? thanks in advance ^^
Does it not work in uSerenity or in uTorrent of the same version also? – Usual uTorrent 2.2.1
only people i see on that torrent are people using the 3.2 beta or deluge. any other version of utorrent does not support it.
That means onlu uTorrent developres can fix this not me =\
Unless the mod can be made working on the beta client,
Can I make a request for the next version, is it possible to tell it to download pieces in order eg 1,2,3,4 and so on?
Forward this request to uTorrent developers, not me. Can’t.
when the next version of serenity? is a year that nothing comes out.
@ lordz: it seems that there is no need …
Wow. Great work. Very good explanation. I like the tool so much. Please keep it up to date. But really well coded.
How can I be Leecher (0% done) and uploading with 1Mbit/s?
Probably by checking “be leecher” and fakeuplaoding 1024 kb\s ? Check cheating tutorials on thematic websites
I mean I checked “fakeuploading 1024 kb\s” and “be leecher”. But this is not logical, is it? Because You can not upload if You did not download anything.
It is not. Then download anything first ;-)
ok. thank you ^^
Very well coded but uSerenity and other programms like this can not prevent You from getting caught by Your Internet Service Provider (ISP) or a lawyer because of downloading illegal stuff from Bittorrent network. Even if You use “No report Upload”, “NoUpload”, “No report Download” or whatever.
Furthermore I advise You to seed Torrents too and not to use things like “NoUpload”-cheats because torrenting is like “social sharing” and this is how it works. If noone seedy noone can download.
Is this a good combination?
-DHT-Patch
-Don’t announce Completed event
-Upload Multiplier:
Between 10 and 20 X
I can regulate the Uploadspeed to 50kb/s which won’t slow me down at all. I just want to download faster and not to appear in public lists like public snatchlists.
“-Don’t announce Completed event” without “no report download & corrupt + be leecher\seeder” gives you out as a cheater because for normal people when torrent-complete-percentage goes to 100% – happens a completed event.
But:
-Is it logical if I get more percentage without downloading (“No report Download”)?
-Does “No report Corrupt” mean that other people downloading from me will download the corrupted file-parts?
-Is it logical when I upload something when I have a percentage of zero (“Be leecher”)?
-“Be Seeder” can slow me down, or?
-What does trackers like istole.it do to people cheating?
By the way: The new uTorrent version 3 does not have only advantages. So I do not think it is necessary to update it.
>>-Is it logical if I get more percentage without downloading (“No report Download”)?
– No.
>>-Does “No report Corrupt” mean that other people downloading from me will download the corrupted file-parts?
– No.
>>-Is it logical when I upload something when I have a percentage of zero (“Be leecher”)?
– No.
>>-”Be Seeder” can slow me down, or?
– Yes. tracker won’t send you other seeds to communicate with.
>>-What does trackers like istole.it do to people cheating?
– No idea, never used or seen it.
Ok, thank You for Your help. And sorry for to many questions. ^^
I think I will leave my settings as they are and risc to maybe get blocked. I only use open trackers like istole.it or publicbt.com and I never got blocked.
Owyn, I hope this hasn’t been addressed. I read through the comments and didn’t see it.
First, thank you! Amazing program, have been using it for several trackers and it works great.
On the option “multiply speed by number of peers connected”, does that mean that if I make my fake upload 300KB/sec, that it will multiply that number by each peer? So I’d be multiplying my upload speed and making it way way higher?
Because I’m hoping it’s that it divides that 300KB/sec between all the peers equally.
And for that matter, does the fake upload speed effect each individual torrent in that label or does it divide it among all the torrents? Because my ratios have been getting crazy high, and I suspect that the fake upload is doing 300KB/sec on each torrent. Seeing as I have 4 or 5 in one label and from the same tracker seeding, does that mean my actual fake upload speed is around 2000KB/sec?
Thanks for any info, I want to clarify the best way to use the program and not get banned for uploading at crazy high suspicious speeds.
>I’m hoping it’s that it divides that 300KB/sec between all the peers equally.
– What? 300KB\sec goes just to tracker, not to peers. (And there is already a limitter for peers number which you can set not to overuse multiplying)
>does the fake upload speed effect each individual torrent
-Yes, it works for each torrent individually, so if you have 10 torrents faking 200KB\sec each you’d have 2000KB\sec total
When I think of it, I probably can do a limitting option, like if first 5 torrents reached specified maximum (1000KB\sec for example) – all torrents after those would fake 0 KB\sec.
-Is it needed?
Hey! Thanks for replying.
Whoops @ peers. I forgot that it was a fake upload,so the peers don’t matter.
I do think a limiter or divider would be a great option! Whereas the fake upload is divided evenly among each torrent in the label. So if you put 300KB/sec as the fake upload and have five torrents in one label seeding, it would be like 60KB/sec each. (Which is exactly i think what you were suggesting there!)
Thanks for clearing that up, because I only want to report my upload speeds as 300KB/sec TOTAL between all of the torrents, and now I understand how my ratios got so high!
Divider would be way more complicated to implement plus it might be not a good idea to give every torrent some speed because there are torrents without much leechers or just with some pause, naturally there can’t be a stable fair division for every torrent you run.
Anybody who cheats private trackers is a D U M B F U C K
you need to add “show download as upload” mode
another download possibility????
You mean beside SendSpace? Why don’t you like it? nowait time there
Hi Owyn, I want to start torrent and just grab seeds/peers and absolutely nothing else to be reported to tracker, about download, upload, completion,
In other words, i want to be shown in website as just started downloading and having nothing. Can you kindly specify:
1. which tick boxes have to be selected in addition to (Connect tracker just Once on start to grab peers) if any?
2. Is the resulting combination safest to avoid bieng banned/detected?
Plz reply.
Thanks!
Hi,
1. check all no report boxes and “be leecher” with your “grab peers” options – that would do the thing you want.
2. some not-greedy fakeuploading\multiplying I believe, you better find info about this on some torrent cheat forum, like that one at links section of right section of this site ;)
Thank you so much Owyn for your quick reply! :)
Hi Owyn, any plans to update to version 2.2.1.25302 ?
Just one bug i found in your mod, i.e. sometimes it doesn’t close after pressing exit button, and keeps running in background.
Can you make serenity for version 2.0.0.18620 / 2.2.1.25302 too,
Or maybe a generic patch to make utorrent to serenity, it would be great!
I personally love version 2.0.0.18620, as it is very stable and UI is good too.
Thank you for making such a wonderful thing.
Current 2.2.1 version is the latest, versions of 2.2.1 after tihs one just had new advertisments inside, nothing else. Version spoofing is planned.
What is 2.0.0 ? from 1.6 to 2.2.1 UI was the same, no? And it has lots of bugs fixed in 2.2.1 anyway, 2.2.1 should be fine as latest before 3.0
Ok, now i understand.
[…] see Feautures page […]
What does “-Check about page in uTorrent Serenity to see if it is loaded ^_^” mean?
Nevermind. I get it.
Paft you’re a genius
how do you use portable mode?
same way as you use it with usual uTorrent, there is no difference.
Hi there, thx for this great ‘mod’ .. please, is there any way to update country flags ? thx in advanced.
uSerenity does not do anything with country flags, so the way to update those is the same as in usual uTorrent of the same version.
is there a possibility to ban in private tracker?
for cheating – there allways is. else – no.
Is this project dead?
No? As you can see he is still active responding to people but not making any new builds (v3+) cause 2.2.1 is the best there is plus it has everything you need already. So no it ain’t dead at all. There is no need at all for a new version if thats what you calling ”dead”.
Actually I have some feautures (like version spoofing) planned from very long time but can’t seem to find time to setup and make everything needed for project building work after system reinstall, *procrastinating* *procrastinating*
Any chances “no upload” feature could be moved from global to per torrent?
Any chances “no upload” feature could be moved from global to per torrent? ²
most likely – no chances, cause I didn’t make “no upload” feauture, just implemented it into uSerenity
Do we need restart uSerenity when changed something in settings manager?
Yes, config file is only read when uSerenity is started
There are some issues with checkboxes in settings, for instance when you check “Don’t announce completed event” and then “Connect tracker just once”, it automatically unchecks “Don’t announce…”, but if you do other way around: first “Connect…” then “Don’t announce”, they both stay checked.
Also, “Connect…” checkbox cannot be checked together with “Upload multiplier” and “FakeUpload”. I don’t see why would it conflict with these two settings.
>they both stay checked.
that won’t do anything anyway, “don’t announce” won’t get chance to get triggered.
>why would it conflict
cause fakeupload won’t get chance to fakeupload (it starts faking after 1st connect) and multiplier won’t get anything to multiply since when we first start torrent from being stopped – it hasn’t uploaded anything yet this session.
If I rename uSerenity.exe to something else, do I need do something else to make it work? It seems when it’s renamed it doesn’t obey “no upload” setting.
Thank you.
If it’s renamed – it won’t obey anything, it just unloads itself if name is not correct.
– Protection agains renamers to “uTmodbyJohn.PlzDonateToJohn.exe”
So what’s wrong with “uTmodbyJohn.PlzDonateToJohn.exe”? totally legit name…I mean, who cares?
The reason for new filename: “no upload” is global setting it requires to have two copies of uSerenity with different settings to be able seed if needed. When both versions are started and then one closed, because of a bug it might stay in memory until killed via task manager. However on windows xp it’s near to impossible to distinguish which instance of uSerenity.exe needs to be killed without using additional tools. On windows 7 no problem, task manager shows path to the file.
To protect users from scammers attaching viruses to the mod, asking money for it and redistributing it under their name so users won’t know it’s fake and dangerous and won’t know how it’s called to google it.
I’ve heard and seen people do this to other mods. Probably using 3rd-party process manager isn’t such a bad idea.
Hello Owyn thanks for this great program. I was trying to get hold of a mod that can create about 1000-2000 fake seeds & leechers in public torrent trackers. Can I get that done with your mod ? Or any other suggestion ?
Thanks.
>create about 1000-2000 fake seeds & leechers
You’d need a botnet for that, not a mod. No suggestions.
It doesn’t work for me, It does not fake upload anything, I don’t know if the other settings works because they can’t be seen but I do see the fake upload doesn’t happen, like serenity just ignores it, It is on default, and tried to label it to default too even though I don’t need to, still no fake upload, I did so it will fake upload if there is one peer connected and still no fake upload, help ?
That most likely means there are no peers connected. Try making a profile which requires 0 peers and test it.
This is a such ugly WordPress Theme for a so great project especially the top and the picture. Can you not use a bit more fresher nicer wp theme for this site?
What themes would you suggest then? Any examples?
This theme was a standart one as I remember. I Don’t see anything bad in it.
You actually make it seem so easy along with your presentation however I to find this matter to be really something which I feel I might never understand. It seems too complicated and very extensive for me. I am looking ahead to your next post, I will attempt to get the cling of it!