uSerenity 2.2.0 Build 24402
see Feautures page
changelog:
– fixed upload multiplier for high real speeds
Download: mediafire
Password: uSerenity22
February 3, 2011 by Owyn
uSerenity 2.2.0 Build 24402
see Feautures page
changelog:
– fixed upload multiplier for high real speeds
Download: mediafire
Password: uSerenity22
thanks! finally an update!
thanks for the update!!
this one same as previous…
uploads over 2gbs does not show up at trackers. It makes detecting fake upload a breeze
it’s not problem of uSerenity, it’s problem of your trackers which can’t show over 2gbs, uSerenity reports upload the same way as normal uTorrent does.
Same here. Upload stats continue to climb in utorrent past 2GB, but the tracker only lists 2GB max uploaded on every file over 2GB on several trackers I’ve tested.
Thanks for the update !
Great job !
Hey there
could you make a “µTorrent 2.2 (23774)” version of you mod?
i am on a tracker with a very limited whitelist :(
tell them to wider the whitelist already
they are very … radical about their whitelist :(
but i will try it.
No, they dont allow the latest version :(
Hi Owyn,
I get the error trying to run ‘uSerenity Settings.exe’
‘This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem’
Using normal utorrent works fine
What could be the issue?
Hi Owyn,
I got uSerenity working by installing vcredist_x86.exe
However I have 2 Issues I need help with:
1) After playing with uSerenity for a while, I can NOT seem to get consistent high download speeds
I created the settings, and have the relevant label (easy)
But after trying multiple variations in the settings, the uSerenity speed gets very fast 500K in 1 min (great!) BUT after 3 mins drops back to 30K (NOT great)
What could be wrong?
2) I have ‘No-Upload’ selected in the settings manager BUT uSerenity uploads anyway
What could be wrong?
thanks
1.
>>What could be wrong?
your inter hardware doesn’t support UTP, turn it off – bt.transp_disposition = 5 in advanced options
nothing to do with uSerenity itself
2.
either it’s overhead (not real upload) or something is wrong
Hi Owyn,
1.
>>your inter hardware doesn’t support UTP, turn it off – >>bt.transp_disposition = 5 in advanced options
disabled UTP however had slowdown again after 3 mins :(
I had ‘maximum upload rate’ set to 1 which I normally have to reduce upload speed otherwise upload can go to 50kB/s.
I changed this to 0 and speed was consistently fast throughout download
2.
>>either it’s overhead (not real upload) or something is wrong
As a test, I downloaded a popular torrent
(9K Seeds : 4K Peers) – in 10 mins (avg 300 kB/s)
———————-
From Serenity bottom status bar
(T : T)
– Downloaded 225MB : Uploaded 5.8MB
From Serenity Top Columns
(Downloaded : Uploaded)
– 225MB : 0 B
From Serenity Torrent Tab
– Wasted: 2.80MB (0 hash fails)
Snapshot in time from Serenity Top Columns
(Down Speed : Up Speed)
– D: 700 kB/s : U: 5 kB/s
My Computers Net Meter shows at the ‘same’ time
(Down Speed : Up Speed)
– D: 821 KB/s : U: 40KB/s
———————-
Q: With ‘No-Upload’ selected would the top column ‘Up Speed’ show 5 kB/s uploads as mine does?
Q: Why would my uploads show 40KB/s?
– is this just overhead (as it seems a little large)?
Q: What is the ‘easiest’ test to ensure that I am NOT uploading packets (short of running a packet sniffer which is a little complicated for me)?
Thanks
1. so i don’t know, go ask uTorrent support as i said uSerenity mod doesn’t do anything about download speed
2.
q1. overhead
q2. overhead
q3. you are
further refer to uTorrent documentation to know how it works or just google, uSerenit part is working fine as it should.
Hi Owyn,
Thanks for your time – final Q
After torrent download is finished & I have removed the torrent from the queue (i.e. queue is ‘completely’ empty) Serenity still shows data both U & D
Serenity Status bar shows D: 0.93k U: 0.74k
What is Serenity uploading & downloading with the queue completely empty?
Thanks
need an option to show current fake upload speed.
need an option to when to start fake upload.
need an option to stop faking when swarm speed is 0.
need an option to stop faking when set ratio is met.
uTorrent 2.2 Build 24683 is released! Please update very soon!!
still crashing on win7 x64. but original utorrent is not. strange but the 2.0.2 20165 stealth mod not crash.
still no idea why, i have no x64 to test nor other people with 7 x64 say they have this problem, works fine for them they say.
Hi Owyn,
Final Q
After torrent download is finished & I have removed the torrent from the queue (i.e. queue is ‘completely’ empty) Serenity still shows data flowing both U & D
Serenity Status bar shows D: 0.93k U: 0.74k
What is Serenity uploading & downloading with the queue completely empty?
Thanks
refer to uTorrent documentation to know how it works or just google, uSerenit part is working fine as it should.
Hi Owyn,
You are right – its a deficiency within utorrent
Serenity is working great – keep up the good work
It doesn’t work on Windows XP x64 SP2
Does fakeupload function when No-Upload is enabled? Also, is it possible to tell how much is currently being fake-uploaded?
Thanks
does, possible by looking at “uploaded” column
Hi Owyn!
Nocomplete_report_seeder Information tab labels would be needed!
How can I set this up? For this mode, you can give the exact settings?
The following is aa mods could do the labels include:
· Original.exe
· DHT-patch.exe
· Fakeup-2x.exe
· Fakeup-5x.exe
· Fakeup-8x.exe
Multi-· 11x.exe
Multi-· 111x.exe
· NoComplete.exe
· NoComplete_Fakeup-2x.exe
· NoComplete_Fakeup-5x.exe
· NoComplete_Fakeup-8x.exe
· NoComplete_Multi-11x.exe
· NoComplete_Multi-111x.exe
· NoComplete_Report-Seeder.exe
· NoComplete_Report-Seeder_Fakeup-2x.exe
· NoComplete_Report-Seeder_Fakeup-5x.exe
· NoComplete_Report-Seeder_Fakeup-8x.exe
· NoComplete_Report-Seeder_Multi-11x.exe
· NoComplete_Report-Seeder_Multi-111x.exe
· NoComplete_NoReport-Leecher.exe
· NoComplete_NoReport-Seeder.exe
· NoComplete_NoReport-Tracker.exe
You can fix this? “So that these labels you put your settings.
Szia Owyn!
Nocomplete -report-seeder
1.
in-seeder
download-no report
Corrupt-No report
-Don ‘t announce Completed Event
or
2.
in-seeder
download-no report
-Don ‘t announce Completed Event
Which is good? 1 or 2?
corrupt = download
so good = 1
Nocomplete_report_seeder = “Seeder” label
Finished downloading. Then the torrents should be “Normal” label?
Or is the label “Seeder” continue?
Fraudster profiles could play in pictures. Solved this? So it would be easier to clear for everyone.
Because I think that many people do not dare to try different ways because they are not sure of the correct cheater Profiles.Legyen Profiles: fake, multi etc..
Hi
hey
i have a dude
when i download a torrent complety….how can i upload these same torrent for increase my ratio??? no fake upload please :)
because when i downloaded these torrernt, it doesnt affect on my ratio but i want to increase my ratio for uploading
change torrent label to “normal” and seed.
How???
can you explain a bit more please ??? :)
Thanks Owyn!
DHT always enabled Normal mode. Tracker may not be big problem? Not be expelled because of this? Ratio free site which profiles / mod / use?
If you download and you become normal seeder Tag Information tab, then you should be stopped torrent?
1 seeder label-100% download torrent-no stop-normal label
or
2 seeder label-100% download torrent-stop-normal-label run torrent
Hey man just to say thanks a bunch for the update. cant believe it’s been a year since im using your modified vesion of Utorrent.
Excellent job on this. its not that i dont share. I use it just to stay safe.
thanks a bunch again man. cheers !
When I installed this mod, I always get pop-up window with “Search Settings Installer” , how to remove this ?
see popup window http://img96.imageshack.us/i/snap1js.jpg/
no idea, ask utorrent developers.
Customer statistics – the ratio of one file 3.492
Statistics of the same file registered on the tracker – 1.957
Why is this difference?
Hello Owyn
I download torrents with a default mode. torrent then stops and normal mode converter. The problem is that I’m sure I download the last in the list!
0 is the true mark in my downloads but aa torrent downloaders list!
I think this is a problem! This can be improved?
Other clients such as expansion nocomplete_noreport_ Leechers
more later, no sign of it among the last I download.
Hello Owyn. I tried this build of uSerenity and when the torrent starts it reports 0 upload and 0 download (ok).
Then I leave it some minutes and stop the torrent, and the only thing that the client reports is my download! Upload is always 0. I only have the Default label in the settings manager. Can you help me?
use http://www.mediafire.com/?9q7wh8rsx57iik9 version with logs and via logfile in the directory of uTorrent see what you are doing wrong.
Owyn, thanks for the debug build. I set my options to only upload if there’s at least 1 peer. I see that this might have been the problem, so I set it to 0. Then I looked at the log and I get:
fake_uploaded N(0) peers(0) rand gave 204.351944: 8680303 total. Up_Stat: 26358639
fake_uploaded N(0) peers(0) rand gave 529.282532: 9222288 total. Up_Stat: 26900624
fake_uploaded N(0) peers(0) rand gave 192.156738: 9419056 total. Up_Stat: 27097392
fake_uploaded N(0) peers(0) rand gave 542.979187: 9975066 total. Up_Stat: 27653402
fake_uploaded N(0) peers(0) rand gave 414.874725: 10399897 total. Up_Stat: 28078233
which is fine. But after some seconds, uSerenity crashes. I will now try without the debug dll.
Please check the code that looks if there are Peers connected, because even if I had peers, it would not start the upload unless I set it to 0, disabling the functionality. Thanks :)
I am having trouble downloading the your mod.. everytime it downloads.. and opened via RAR/ZIP on Mediafire the CRC32 shows 0000000. therefore am unable to extract the files.
http://www.7-zip.org
µTorrent 2.2.1 Build 25110 has been released!
Please release updated Serenity Mod very soon!!!
^^
What Simba said. Owyn, thank you for your hard work and keep it up!
Yes, if we can get an update for µTorrent v2.2.1.25110. That would be great………..
Thanks for the current mod. With the latest I had problems…